Description: Hydropneumatic spring leg to spring control arm. Shock absorber to lower control arm m 10x1x60. Shock absorber to spring control arm m 10x1x60. Pitman arm to steering box assembly m10x1x60. Hydropneumatic spring leg to rear axle.

Description: M10
Diameter: 10mm
Strength / hardness class: 10
Thread code letter: M
Thread pitch: 1mm
Width across flats: 16mm. Propeller shaft to transmission. Shock absorber to lower control arm m 10x1. Shock absorber to spring control arm m 10x1. Hydropneumatic spring leg to spring control arm m 10. Shock absorber to frame. Hydropneumatic spring leg to rear axle.

Description: Control valve.

Description: Steering worm bearing.

Description: COVER TO STEERING BOX
Diameter: 8mm
Strength / hardness class: 10.9
Thread code letter: M
Thread pitch: 1mm.

Description: 3.10 mm as required.

Description: 3.05 mm.

Description: 2.95 mm as required.

Description: ACCELERATOR PEDAL BEARING
Inside diameter: 12mm
Material thickness: 1mm. STEERING SHAFT TO BOX
Inside diameter: 12mm
Material thickness: 1mm. CONTROL SHAFT
Inside diameter: 12mm
Material thickness: 1mm. NUT LOCK
Inside diameter: 12mm
Material thickness: 1mm.

Description: Adjusting screw. Steering shaft to box m12 x 1,5.

Description: Cover to box.

Description: Adjuster.

Description: Steering gear.

Description: Lower steering shaft to upper steering shaft. Shock absorber to lower control arm. Steering coupling to steering shaft. Steering coupling to steering gear. Backrest adjuster.

Description: Steering to frame.